Long Range Wireless 802.11b/g Outdoor Device Client Bridge / Access Point / Client Bridge
Kategori
Online Help
Yahoo Messenger Online Help
En Genius EOC 2610 802.11g (2.4GHz)OutdoorMulti-Client Bridge/AP/ WDS CODE: EOC - 2610
Description
EOC-2610 is a long range outdoor wireless Access Point and Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum. It features high transmitted output power and high receivable sensitivity along with antenna diversity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment.
It supports distance control by 1km to 30km; antenna diversity function and RSSI indicator which enables the best transmit and receive signals for traffic communication. This product comes with PoE injector for building in outdoor environment easily.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.
The attractive design, high performance, and array of features make EOC-2610 a suitable wireless solution for your residence or office.
| Features | ||||||||||||||||||
| Wireless | - 2.4GHz It works in 2.4GHz frequency spectrum - High Data Rate High speed physical transmitting rate up to 54Mbps with 11g, support large payload such as MEPG video streaming - Multifunction application Access Point/Client Bridge - Long range transmitting Transmit power control and distance control (ACK timeout) - Signal Strength LED indicators have the best transmit and receive signal for traffic communication - Antenna Diversity Two internal panel antennas and also could switch to external antenna for applications |
|||||||||||||||||
| Networking | - Public wireless solution An AP interface that is especially useful in public areas such as hotspots and enterprise - Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build-up easier - QoS(WMM) Enhance performance and density (Phase 2) |
|||||||||||||||||
| Security | - 802.11i WEP, WPA-PSK (TKIP or AES), WPA2 - 802.1x IEEE 802.1x Supplicant support in CB mode - MAC address functions MAC address filter (AP mode) - L2 isolation - Station isolation - Wired separation |
|||||||||||||||||
| Management | - Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade - Reset & Backup Reset to factory default. User can export all setting into a file via WEB - MIB MIB I, MIB II(RFC1213) - SNMP V1, V2c |
|||||||||||||||||
| Hardware Specification | ||||||||||||||||||
| Physical Interface | One 10/100 Fast Ethernet RJ-45 Reset Button One SMA Connector One switch (external and internal antenna switching) |
|||||||||||||||||
| LED indicators | Power/ Status LAN (10/100Mbps) WLAN (Wireless is up) 3* Link Quality (Client Bridge mode) • Green: Good Quality • Yellow: Marginally Acceptable Quality • Red: Bad Quality |
|||||||||||||||||
| Power Requirements | Active Ethernet (Power over Ethernet, IEEE802.3af) 24V DC/1A Proprietary PoE design |
|||||||||||||||||
| Regulation Certifications | FCC Part 15/UL, ETSI 300/328/CE | |||||||||||||||||
| RF Specification | ||||||||||||||||||
| Frequency Band | 802.11b/g 2.412~2.472GHz |
|||||||||||||||||
| Modulation Technology | OFDM = BPSK, QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK |
|||||||||||||||||
| Operating Channels | 802.11b/g 11 for North America, 14 for Japan, 13 for Europe |
|||||||||||||||||
| Receive Sensitivity (Typical) | 802.11g -92 dBm @ 6Mbps, -74 dBm @ 54Mbp |
802.11b -97 dBm @ 1Mbps -89 dBm @ 11Mbps |
||||||||||||||||
| Available transmit power (Average power) |
|
|||||||||||||||||
| Internal Antenna | Embedded 10dBi Panel antenna (Antenna diversity) | |||||||||||||||||
| External Antenna | 1* Reverse SMA connector | |||||||||||||||||
| Software Features | ||||||||||||||||||
| General | ||||||||||||||||||
| Topology | Infrastructure | |||||||||||||||||
| Protocol / Standard | IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.11b/g (2.4GHz WLAN) |
|||||||||||||||||
| Operation Mode | 802.11 11b/g Access Point Client Bridge |
|||||||||||||||||
| LAN | DHCP Client | |||||||||||||||||
| Wireless | Channel Selection (Setting varies by countries) Transmission Rate 11 b/g：54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps Distance Control : 1km to 30km 802.1x Ack timeout Transmit power table Signal Strength indication using LEDs |
|||||||||||||||||
| Security | WEP Encryption-64/128/152 bit WPA Personal (WPA-PSK using TKIP or AES) WPA Enterprise (WPA-EAP using TKIP) 802.1x Authenticator Hide SSID in beacons L2 isolation(AP mode) Wireless STA (Client) connected list VLAN pass through |
|||||||||||||||||
| QoS | WMM (Phase 2) | |||||||||||||||||
| Management | ||||||||||||||||||
| Configuration | Web-based configuration (HTTP) | |||||||||||||||||
| Firmware Upgrade | • Upgrade firmware via web-browser • Keep latest setting when f/w update |
|||||||||||||||||
| Administrator Setting | • Administrator password change | |||||||||||||||||
| Reset Setting | • Reboot (Press 1 second) • Reset to Factory Default (Press 5 seconds) |
|||||||||||||||||
| System monitoring | Status, Event Log | |||||||||||||||||
| SNMP | V1, V2c (Phase 2) | |||||||||||||||||
| MIB | MIB I, MIB II (RFC1213) and Private MIB (phase 2) | |||||||||||||||||
| Backup & Restore | Settings through Web | |||||||||||||||||
| Time setting | NTP (Auto-setting of time) Time setting manually |
|||||||||||||||||
| Environmental & Mechanical | ||||||||||||||||||
| Temperature Range | Operating -20°C~70°C Storage -30°C to 80°C |
|||||||||||||||||
| Humidity (non-condensing) | 0%～90% typical | |||||||||||||||||
| Dimensions | 260mm (L) x 84mm (W) x 55mm (H) | |||||||||||||||||
| Weight | 300g | |||||||||||||||||